High-Pressure Water Jetting & Hydro Jetting Services in the GTA

When a clog keeps coming back, snaking isn't enough. Hydro jetting scours the whole pipe clean grease, roots, and scale so the blockage doesn't return. Expert high-pressure water jetting near you. Free inspection.

Request Your Free Inspection

DrainCom is the

No. 1 Rated

choice for licensed and insured basement waterproofing services in Mississauga, Canada.

A drain snake punches a hole through a clog. Hydro jetting strips the whole pipe wall clean,which is why the clog comes back after snaking but not after jetting. We camera the line first to confirm the pipe is sound, then blast it clean with high-pressure water. No chemicals, no digging, no guesswork.

20+ years clearing GTA drains, including older Toronto homes with clay and cast-iron lines. Licensed, insured, fully-stocked trucks, same-day service. We inspect before we jet and we never recommend a repair you don’t need.

Call us at 905-238-6800

for a free drain inspection and quote, or fill out the request form at the top of this page.

What Homeowners Say About DrainCom

What Hydro Jetting Clears

High-pressure water jetting handles the buildup that snaking and chemicals leave behind. Here’s what it cuts through.

Grease & Sludge

Cooking grease cools and hardens on the pipe wall, then traps everything behind it. Jetting scours the grease and sludge off the wall completely, the reason it’s the go-to for kitchen and restaurant lines.

Tree Roots

Roots grow into older pipe joints and block the line solid. Drain snaking cuts a path but leaves root tissue behind to regrow. Jetting shreds the roots and flushes the debris out, leaving a clean pipe.

Mineral Scale & Calcification

Hard water leaves calcium and mineral scale on the pipe wall over years, narrowing the line and catching debris. High-pressure water strips the scale that snaking and chemical cleaners can’t touch.

Sediment & Debris

Silt, soap scum, food scraps, and everyday grit build up and slow the flow. Jetting clears the full length of the pipe, not just the blockage.

Commercial & Restaurant Hydro Jetting

If you run a restaurant, café, or any kitchen, your drains see grease and food waste every day and a blocked line can shut you down. We provide scheduled hydro jetting that keeps commercial drain lines and kitchen stacks clear, so a backup never costs you a day of business.

Regular flushing is preventive maintenance for high-use lines. We set a schedule that fits your operation, jet the grease and scraps out before they block the pipe, and run a drain camera inspection to confirm the line is clear, so you stay open, code-compliant, and backup-free.

How Much Does Hydro Jetting Cost in the GTA?

Cost depends on the line, how heavy the buildup is, how accessible the cleanout is, and whether it’s residential or commercial. A single residential line is the lighter end. A heavily greased commercial main or a long sewer line is more involved. You get the price before we start.

Service	Price Range (CAD)	Notes
Residential hydro jetting (single line)	$500 to $900	Accessible cleanout, standard buildup
Main drain / sewer line jetting	$700 to $1,400	Heavier buildup, longer line
Commercial / restaurant jetting	Quoted on inspection	Kitchen stacks, grease lines, scheduled service
Drain camera inspection	$250 to $500	Required before jetting; often credited toward the work

All prices are approximate and based on standard conditions. Written quotes are provided after a free inspection. We give you the price upfront ; no surprise charges.

Pricing note: We camera the line before jetting, always. It confirms the pipe is sound enough to jet and shows the buildup we’re dealing with.If the camera finds a cracked or collapsed pipe, jetting isn’t the answer, that’s a drain repair service in the GTA, and we’ll show you why on screen instead of jetting a pipe that can’t take it.

What Is Hydro Jetting and How Does It Work?

Hydro jetting is a drain-cleaning method that uses high-pressure water typically 3,000 to 4,000 PSI to scour the inside of a drain or sewer pipe completely clean. A specialized nozzle is fed into the line and sprays water in multiple directions, cutting through the blockage ahead of it and stripping grease, roots, and scale off the pipe wall as it goes.

That’s the difference from a drain snake. A snake punches a hole through the clog so water can pass; jetting removes the entire blockage and the residue that caused it, so it doesn’t come straight back. It uses only water and no chemicals which makes it safe for the environment and effective on buildup chemical cleaners can’t shift. (Want a quick clog cleared instead? See Drain Cleaning & Unclogging.)

Will Hydro Jetting Damage My Pipes?

Not when it’s done right. On a sound pipe, high-pressure water cleans without harm. That’s why we camera the line first, every time. The inspection confirms the pipe is in good enough shape to jet and rules out cracks or collapse.

This matters most in older Toronto and GTA homes with clay tile or cast-iron drains. Jetting a pipe that’s already cracked or deteriorated can make the damage worse so if the camera shows a broken line, we don’t. We show you the problem and walk you through repair options instead. (Broken pipe, not just buildup? See Drain Repair & Replacement and Trenchless Pipe Repair.)

Signs You Need Hydro Jetting

These point to buildup a snake won’t fully clear:

Clogs that keep coming back after snaking
Slow drainage across more than one fixture
Gurgling drains and recurring backups
A grease-heavy kitchen or restaurant line
Foul smells that return after cleaning
An older home with years of scale or root buildup
A drain that's never been professionally cleaned

If the problem keeps returning, the buildup is still on the pipe wall. Jetting strips it off so the line actually stays clear. And when a line backs up during heavy rain, clearing it is only part of the fix, a backwater valve stops storm water and sewage from pushing back into the basement.

Hydro Jetting vs. Snaking - Which Do You Need?

Both clear a blockage, but they’re built for different jobs. Here’s how we decide.

Snaking is the right call when

it's a single, one-off clog and you need the path cleared fast. A rotating cable breaks through the blockage and gets the water moving.

Hydro jetting is the right call when

The clog keeps coming back, the line is coated in grease or scale, roots are involved, or it's a high-use commercial line. Jetting cleans the whole pipe wall, so it stays clear far longer.

Draincom make the call after the camera inspection. Snaking for a quick clog, jetting for buildup, roots, and recurring problems.

Not sure which you need? →

How Long Does Hydro Jetting Take?

A single residential line

Usually 1 to 2 hours, including the before-and-after camera check.

Main drain or sewer line

Around 2 hours, depending on the buildup and the length of the line.

Commercial / restaurant lines

Varies with the system; we give you a time frame after the inspection.

We come prepared, work clean, and confirm the line is clear on camera before we call the job done.

Top Rated Waterproofers just a call away!

Business Hour:
Monday to Friday: 8a.m -9p.m
Saturday and Sunday: 9a.m – 2p.m

Frequently Asked Questions

What is hydro jetting?

Hydro jetting is high-pressure water cleaning for drains. A nozzle sprays water at 3,000 to 4,000 PSI through the pipe, cutting through clogs and scouring grease, roots, and scaling off the pipe wall. It uses only water ; no chemicals and clears the whole line, not just the blockage.

How is hydro jetting different from snaking?

A drain snake punches a hole through a clog so water can pass. Hydro jetting removes the entire blockage and strips the buildup off the pipe wall, so the clog doesn’t come back. Snaking is great for a quick, single clog; jetting is for grease, roots, and recurring problems.

Will hydro jetting damage my pipes?

Not on a sound pipe and we camera the line first to make sure it is. The inspection rules out cracks or collapse. If the pipe is already broken, especially old clay tile or cast iron, we don’t throw it; we show you the damage and explain repair options instead.

Is hydro jetting safe for older homes?

Yes, when the pipe is checked first. Many older Toronto homes have clay or cast-iron drains, so the camera inspection before jetting is essential it confirms the pipe can handle the pressure. We never jet a line we haven’t inspected.

How much does hydro jetting cost?

Residential jetting runs about $500–$900, and main or sewer line jetting $700–$1,400, depending on buildup and access. Commercial and restaurant lines are quoted after inspection. You get the price upfront.

How often should I get my drains hydro jetted?

For most homes, only when buildup or recurring clogs call for it. For restaurants and high-use commercial kitchens, scheduled jetting often once or twice a year keeps grease lines clear and prevents shutdowns.

Do you offer hydro jetting for restaurants and commercial properties?

Yes. We provide scheduled commercial hydro jetting for restaurants, kitchens, condos, and multi-unit buildings clearing grease and food waste from kitchen stacks and main lines before they back up and interrupt business.

Do you offer free drain inspections?

Yes , a free, no-obligation inspection and written estimate across Toronto and the GTA. We camera the line before any jetting, and you get the price before we start.